Compare Our Gutter System
When comparing the various solid
aluminum products offered on the
market, one should first recognize
that most of them do the job they
are advertised to do: keeping the
gutters from clogging up with debris
while channeling all of the rainfall
into the gutter. The consumer then
needs to look at differences between
the products to decide which one to
have installed. This comparison
will usually lead the consumer to
LeavesOut for a variety of reasons.
 Some
products require the existing
gutters to be replaced with an
all-new integrated gutter system
with cover. Most people don't need
gutters replaced, just covered to
keep debris out. Even if the
customer has new gutters and then
LeavesOut installed, the total cost
is less than installing the
integrated system.
LeavesOut
carries a transferable limited
lifetime warranty. The Alcoa 2-coat
lo-mar finish is applied to both
sides of the product to reduce the
possibility of corrosion and extend
the life of the product. Most
competitors' products are painted
only on one side.
LeavesOut
has a lower profile than other
similar products, which greatly
increases it's eye-appeal. Based on
appearance alone, the customer will
frequently choose LeavesOut over the
competition.
Most
gutter covers are attached to the
gutter using either aluminum or
plastic fasteners. LeavesOut uses
stainless steel which, of course, is
stronger and more durable, and
therefore can be spaced further
apart. This means there is less
opportunity for debris to catch on
the fasteners resulting in virtually
no maintenance.
LeavesOut
comes with a wide range of colors to
match either the gutter or the roof
color. There are 22 standard colors
with many additional colors
available by special order.
LeavesOut
is secured to the gutter lip with
the material slipped between the 2
bottom layers of shingle. It is not
glued, nailed, or screwed to the
roofing, as are some other products
on the market. When it comes time to
re-shingle the roof, LeavesOut can
be easily removed and reinstalled
where other similar products are
very difficult to remove and nearly
impossible to reinstall and still
function properly.
The
position of LeavesOut allows a
ladder to be leaned against the
gutter and not touch the product.
Several other products on the market
get dented or pushed out of position
by ladders being leaned against
them.
The
installed cost of LeavesOut is about
half that of similar products. Where
LeavesOut has not been marketed yet,
the competitor's prices are known to
be 3 to 4 times higher!
Because
of the design and installation
method of LeavesOut, application to
different roof configurations is
quite flexible. With this
flexibility LeavesOut is widely
known as the "most veresatile gutter
cover in the world". It can be
installed on both 5" and 6" standard
aluminum gutters. It is successfully
installed not only on standard
shingled roofs, but also cedar shake
roofs, metal roofs and even slate
roofs. It installs on virtually flat
roofs to nearly vertical (23/12
pitch) roofs. The bottom line is
that LeavesOut can be installed
where other products cannot.
 The
LeavesOut guarantee is that it will
perform as advertised or we will
come back to service the product to
ensure proper performance. It is
installed by certified dealers who
are specially trained, thus keeping
LeavesOut in the position of
offering the best gutter cover on
the market at the most reasonable
price. If the customer is not
satisfied with LeavesOut performance
within 90 days of installation, the
company is prepared to remove the
product and refund the customer's
money- a policy unique to the
industry of gutters covers.
If you are looking for a
gutter protection system in the Charlotte area
please
call us today at 704-821-6353 or
complete our
online request form.
|
